HydroCAD 建模雨水徑流計算輔助設計工具-資安軟體/電腦輔助設計軟體/研究分析軟體/新永資訊有限公司

简中 EN

標題搜尋：

⭠ 左右滾動 ⭢
  1. 首頁
  2. 產品
  3. 繪圖應用軟體

HydroCAD 建模雨水徑流計算輔助設計工具

  • HydroCAD 建模雨水徑流計算輔助設計工具
  • 編號
  • 類別
    繪圖應用軟體
  • 介紹
    In a HydroCAD model, stormwater chambers typically appear as part of the storage definition for a “pond”. In the simplest case, HydroCAD calculates the available storage for use with other calculations. But more often, it is used to generate a completer inflow or runoff hydrograph and route it through the pond. The resulting analysis indicates the water levels attained throughout the rainfall event, as well as any discharge that may occur through outlet devices or infiltration into the surrounding ground.
  • 價格
諮詢此產品

HydroCAD 建模雨水徑流計算輔助設計工具

In a HydroCAD model, stormwater chambers typically appear as part of the storage definition for a “pond”. In the simplest case, HydroCAD calculates the available storage for use with other calculations. But more often, it is used to generate a completer inflow or runoff hydrograph and route it through the pond. The resulting analysis indicates the water levels attained throughout the rainfall event, as well as any discharge that may occur through outlet devices or infiltration into the surrounding ground.

Flexible Storage Options
Each pond may include an unlimited number of storage definitions as required to describe its overall storage characteristics. This makes it easy to model complex storage arrangements, such as a combination of multiple chambers, pipe storage, catch basins, or other contributing volumes.

But the most significant feature is the ability to embed (bury) chambers in a bed of crushed stone, and have HydroCAD automatically calculate the combined storage at any water surface elevation. This makes it easy to determine the storage for virtually any configuration of storage chambers, without the need for manual calculations.

HydroCAD can also model almost any imaginable storage arrangement, including chambers of different sizes combined with auxiliary storage from adjacent pipes and catch basins, and even above-ground areas (e.g. parking lots) that may provide overflow storage for certain events.

HydroCAD is a Computer Aided Design tool used by Civil Engineers for modeling stormwater runoff. HydroCAD provides a wide range of commonly used drainage calculations including:

bullet SCS, NRCS, SBUH runoff hydrographs
bulletRational Method with automatic IDF curves
bullet Hydrograph routing through ponds & reaches
bullet Coupled ponds with automatic tailwater
bulletAutomatic hydraulics and culvert calculations
bulletAutomatic pond storage calculations, including embedded storage chambers
bulletAutomatic layout and modeling of underground storage systems
bulletLand-use analysis and pollutant loading calculations
bullet Easy management and reporting of multiple rainfall events
bulletRuns on any Windows PC - No other CAD software required
SmartDraw 圖表製作軟體

SmartDraw 圖表製作軟體

SmartDraw 是專業的圖表製作軟體。可以用它輕鬆製作組織機構圖、流程圖、地圖、房間佈局圖、數學公式、統計表、化學分析圖表、解剖圖表等等。附帶的圖庫裡包含數百個範例、數千個符號和外形供你直接套用。並可直接去官往下載更多內容!

3DMark v2 圖形卡效能基準測試軟體

3DMark v2 圖形卡效能基準測試軟體

3Dmark包含了PC和移動設備基準測試所需的一切功能。無論您是在智慧型手機、平板電腦、筆記型電腦還是桌上型電腦上玩遊戲，3DMark 擁有專為您的硬體而設計的基準測試。3DMark 將推出更多測試，而且新介面更快捷、更靈活、更易用。此外，您還可以通過選擇所需安裝的測試項目更快下載並節省存儲空間。

KaleidaGraph 科學繪圖分析軟體

KaleidaGraph 科學繪圖分析軟體

KaleidaGraph將您複雜的數據轉為有意義的圖形，繪圖速度非常快，文件可在Windows與MAC兩平台中交換使用，新的特色包含：支持Excel之檔案，Windows和Mac檔案可互換，頁面非常容易設定，可同時開啟32組圖；KaleidaGraph主要內容特色：可接受Excel和text文件的數據，使用代數和統計的函數可以處理八百萬點數據，提供16種精確的2D圖型，獨立的上下標誤差條狀圖，包含9種內建的曲線套配，(線性回歸與平滑套配) ，也可輸入您自己的配套方程式